HOW TO PAGE
Toyota Land Cruiser FJ80 & Lexus LX450 Expedition Built Vehicles.
|
|
Remote Programming Instructions
1. Turn key to "ON”.
2. Press and Hold the ECU’s GREEN
PROGRAMMING BUTTON for 3 seconds located under the drivers seat.
NOTE: The STATUS MONITOR LED turns on for 5 seconds.
YOU MUST PERFORM THE NEXT STEP WITHIN 5 SECONDS.
3. Press and release the REMOTE CONTROL top or bottom button.
NOTE: The STATUS MONITOR LED turns off. You should hear one chirp. The exterior lights flash once.
4. Turn off the ignition. The ECU will now operate with the REMOTE CONTROL you just programmed.
|
|
